Bus Body Aluminium Extrusion Profiles
Aluminium sections for bus and coach bodies
Bus builders use aluminium (aluminum) extrusions to cut body weight, which lowers fuel use and raises payload. Snalco extrudes structural and trim sections for bus bodies, made to the builder drawing and cut, drilled and finished at our plant.
| Quick answer Bus body profiles are made in 6063 and 6061 or 6082 where structural strength is needed. Dies are designed in our own tool shop from your drawing. |
Typical bus body sections
| Area | Sections |
| Side and roof structure | Frames, rails, rib and stringer sections |
| Floor | Floor planks, support and cross sections |
| Windows and doors | Window frames, glazing channels, door sections |
| Interior | Seat rails, luggage rack sections, ceiling and panel trims |
| Exterior trim | Edge, drip, corner and cover sections |
Why aluminium for transport
- Low weight: about one third of steel, so lighter vehicles and better payload.
- Corrosion resistance: helps on the road with rain, salt and washing.
- Complex shapes in one piece: fewer parts and fewer joints.
- Joining options: bolting, riveting, welding and bonding are all used.
- Recyclable: supports end-of-life recovery.
| Item | What Snalco can supply |
| Alloys | 6063 T5/T6 (general sections), 6061 T4/T6 and 6082 T5/T6 (higher strength), 6005, 6060, 6463; 1XXX series on request |
| Standards | GB 5237-2008, JIS H, AAMA, BS, EN |
| Finishes | Mill finish, anodised (anodized), powder coating, wood grain, electrophoresis, PVDF paint, sand blasting, polishing |
| Further processing | Cutting to length, drilling, punching, bending, welding, machining, fabrication of finished parts |
Why Snalco
- Own extrusion plant at Kosamba, Surat, built around a 1600 UST four-column hydraulic press that handles 6 inch and 7 inch billets.
- An in-house tool shop, so new dies and die corrections do not wait on an outside vendor.
- A working quality lab: spectrometer for chemistry, UTS machine, Rockwell and Brinell hardness testers, conductivity meter, metallurgical microscope and a profile projector for dimensions.
- Cutting to length, drilling, punching and machining done at the plant, so you can receive parts ready to fit.
How to order
- Section and size: dimensions in mm, wall thickness, and the profile number or drawing.
- Alloy and temper: for example 6063-T5, or 6061-T6 where more strength is needed.
- Builder drawing: profile drawing with tolerances and fit-up details.
- Finish: mill finish, anodised, powder coated or another finish from the list above.
- Length and quantity: cut lengths in mm or full mill lengths, and the total weight or number of pieces.
- Delivery point: a city in India or an export port, so freight and packing can be quoted.
| Send your bus body profile drawing • Send the size, alloy, finish and quantity through the contact form, or share a drawing. The Snalco team replies with availability, lead time and a price for your quantity. • Factory: Block No. 604/2, Kosamba, Surat, Gujarat, India. |
Customized Bus Body Aluminium Extrusion Profiles by Snalco
At Snalco, we specialize in the design and manufacturing of Customized Bus Body Aluminium Extrusion Profiles. Our products are designed to meet the unique needs of the textile industry, providing robust, efficient, and cost-effective solutions.
Unmatched Quality and Precision
Our aluminium extrusion profiles are crafted with precision, ensuring a perfect fit for your textile machinery. The use of high-grade aluminium guarantees durability and resistance to wear and tear, extending the lifespan of your equipment.
Frequently asked questions
Which aluminium profiles are used in a bus body?
Frames, rails, floor sections, window and door sections, luggage racks and trim sections.
Can Snalco make a die for my bus body design?
Yes. Send the drawing and we design the die and supply trial samples.
Which alloys are used for aluminum bus body sections?
Typically 6063 for trim and general sections and 6061 or 6082 for structural members.
Do you finish profiles?
Yes. Mill, anodised and powder coated finishes are available, along with cutting and drilling.
What quantities do you handle?
Both prototype lots and regular production runs. Share your annual volume for lead time.
Choose Snalco’s Customized Bus Body Aluminium Extrusion Profiles for a seamless, efficient, and sustainable textile manufacturing process. Contact us today to learn more about our products and services. We are here to assist you in achieving your manufacturing goals.
Are you Ready to Transform Your Projects
Get in Touch
SNALCO: Shaping the Future, One Extrusion at a Time